Featured
- Get link
- X
- Other Apps
Top 3 Electrical Conductors (Why Wires Are Copper)
Silver is the best common electrical conductor, copper is only a few percent behind, and gold comes third. So why is almost every wire in your walls, chargers and appliances made of copper? Because engineering is rarely about picking the single best material. It is about picking the best deal. Our short video, "Top 3 Electrical Conductors (Why Wires Are Copper)", walks through the ranking in under a minute. This article adds the detail the format has no room for: what resistivity means, how close the top two really are, and how to apply the same thinking to your own projects.
Watch the short: Top 3 Electrical Conductors (Why Wires Are Copper)
A quick science explainer from our YouTube channel — full playlist on the channel page.
What the short shows
The video is a simple countdown of the three metals that carry electricity best among common materials. It names silver first, copper second and gold third, then asks the question most people never think to ask: if silver wins, why are wires not silver?
The answer in the video is practical rather than dramatic. Silver costs far more than copper, and copper is cheap and easy to draw into wire. The small gap in performance is not worth the large gap in cost. That is the whole lesson, and it applies far beyond wiring.
A note on how we made it: the footage comes from PIL, Pexels and Pixabay, and the narration is an AI voice. The facts come from the reference tables and government reports linked at the end of this article.
What "best conductor" actually means
When engineers compare how well materials carry current, they use a property called resistivity. It describes how strongly a material resists the flow of electric charge, and it is measured in ohm-metres. The lower the resistivity, the better the material conducts. Conductivity is simply the flip side of the same number: high conductivity means low resistivity.
Resistivity is a property of the material itself, not of a particular wire. A thick wire resists less than a thin one, and a long wire resists more than a short one, but for any given shape, a material with lower resistivity will always do better. That is why resistivity tables are the standard way to rank metals fairly.
Two other details matter when you read these tables. First, values depend on temperature, so tables state a reference temperature. The HyperPhysics table we used lists its figures at 20 degrees Celsius. Second, the exact value shifts a little depending on purity and processing. This is why you will see more than one number for copper in the same table.
The top 3, in order
1. Silver
Silver sits at the top. In the HyperPhysics resistivity table, silver is listed at 1.59 x 10-8 ohm-metres at 20 degrees Celsius, the lowest figure among the common metals in that table. If the only goal were moving current with minimum resistance, silver would be the answer every time.
2. Copper
Copper is listed at 1.68 x 10-8 ohm-metres in the same table, with an alternate entry of 1.724 x 10-8 and an annealed copper entry of 1.72 x 10-8. The spread between those entries is a good reminder that real-world copper varies with how it was made and treated.
3. Gold
Gold comes third in the ranking shown in the video, and the tables back it up. The Engineering ToolBox table linked in the sources lists gold at 2.24 x 10-8 ohm-metres, which is roughly a third higher than copper's 1.68. That is a real gap, not a rounding difference, and it is why gold is not the answer to "which metal carries current best". Gold's reputation comes from a different problem entirely: it does not corrode, so it keeps a clean contact surface where copper would slowly oxidise. That is why you find it plating the contacts in connectors and test equipment rather than forming the bulk of a power cable.
How close are silver and copper?
Using the HyperPhysics figures, copper's 1.68 is about 6 percent higher than silver's 1.59. That is the "few percent" in the video description. In everyday terms, a copper conductor of the same size resists only slightly more than a silver one.
It helps to put that gap next to a different metal. The same table lists aluminium at 2.65 x 10-8 ohm-metres. That is clearly higher than both silver and copper, and the difference is far larger than the one between the top two. So the real story is not that copper is a weak second place. It is that silver and copper form a tight leading pair, with the field further behind.
This is the key to the video's argument. When two options are nearly equal on the property you care about, the decision shifts to everything else: price, availability, and how easy the material is to work with.
Why wires are copper
The video gives two reasons, and both are about practicality.
- Cost. Silver costs far more than copper. When you need kilometres of wire in a building, a vehicle or a power line, a small improvement in conductivity cannot justify a large increase in material cost.
- Workability. Copper is easy to draw into wire. Wire drawing means pulling metal through progressively smaller holes to make it thin and long, and a material that does this readily is cheaper and more reliable to manufacture.
Put together, copper delivers nearly the same electrical performance as silver at a far friendlier cost and with easy manufacturing. That combination is why copper became the default.
The US Geological Survey publishes annual Mineral Commodity Summaries for both silver and copper. They are a good place to look if you want to see how these metals are produced and used at industrial scale, and they are linked in the sources below.
Engineering is the best deal, not the best material
The line that ends the video's description is worth repeating: engineering is often about the best deal, not the best material. It is easy to assume that engineers always chase the top-performing option. In practice they weigh several things at once.
- How much better is the best option, in the property that matters?
- What does that improvement cost, per unit and at full scale?
- Can it be made, shaped and installed with the tools and processes that already exist?
When the answers are "a few percent", "a lot" and "with more difficulty", the runner-up wins. Copper wiring is the textbook example, but the same logic shows up in software, product design and tool selection.
Applying the idea to AI tools and workflows
Because this blog is about AI tools and workflows, here is the part that carries over. The trap with any tool comparison is chasing the top of a leaderboard. If the best model, app or service is only slightly better than a cheaper, easier alternative on the task you actually have, the alternative is often the right choice.
A short checklist you can reuse:
- Define the one metric that matters for your task, the way resistivity is the metric for conductors.
- Measure the gap between your top two or three options on that metric. Do not assume it is large.
- Weigh the gap against cost and effort. A gap of a few percent rarely justifies a big jump in either.
- Check how easily the option fits your process. Copper wins partly because it is easy to draw into wire. A tool that fits your existing workflow has a similar advantage.
If you enjoy this kind of reasoning about claims and evidence, our post Do You Only Use 10% of Your Brain? applies the same habit of checking a popular idea against what is actually known.
A tool I use: that checklist is the one I run whenever I compare AI tools, and the tedious part is never the decision. It is measuring the gap: opening each candidate's page, pulling the price and the one spec that matters, and writing the numbers down in the same shape so they can be compared at all. I use AgentDelegator CLI ($5 one-time, price checked on the Gumroad page 2026-11-21) to hand each page to a separate agent and collect the results, then I open the pages myself and check the figures before I trust a single one. It does not pick the winner for you. It just makes the "a few percent better, a lot more expensive" comparison cheap enough that you actually do it instead of guessing.
AgentDelegator CLI on Gumroad →
Disclosure: AgentDelegator CLI is sold by the same people who publish this blog, so if you buy through that link the money comes to us directly. There is no third-party affiliate program behind it. Nothing in this article was shaped to sell it — every resistivity figure above comes from the tables linked in Sources.
Common misreadings to avoid
- "Silver is the best, so silver wire is always better." Better on resistance, yes. Better overall, not once cost and manufacturing are included.
- "Copper is a poor substitute." The table shows it only a few percent behind silver, which makes it a very strong second rather than a compromise.
- "One number settles everything." Resistivity depends on temperature and on how the metal was processed, so quoted values are reference points, not guarantees for every wire.
- "A short video is the full story." A one-minute short is a starting point. Use the linked tables if you need exact figures for a design.
Sources
- HyperPhysics: Table of Resistivity
- Engineering ToolBox: Resistivity and Conductivity
- USGS Mineral Commodity Summaries 2024: Silver
- USGS Mineral Commodity Summaries 2024: Copper
Who this is for / bottom line
This article is for students, hobbyists and curious readers who want to understand why copper dominates wiring, and for anyone who likes a clear example of trade-offs in engineering. The bottom line: silver conducts best, copper is only a few percent behind, gold is third, and copper wins in practice because it is cheaper and easy to draw into wire. Pick the best deal, not just the best material.
Questions or corrections: nandminc2020@gmail.com. Related reading: Do You Only Use 10% of Your Brain?
- Get link
- X
- Other Apps
Popular Posts
Best AI Music Generators in 2026: Free Tiers, Text-to-Song Tracks and the Tools Worth Paying For
- Get link
- X
- Other Apps
Best AI Video Generators in 2026: Free and Paid Tools Compared
- Get link
- X
- Other Apps
Comments
Post a Comment